Dry Powder Granulation Machine for Wash Detergent Powder

• After-sales Service: Blister
• Warranty: 1 Years
• Heating Mode: Transmission
• Material Status: Powder, Solution, Cream, Strap, Bulk
• Atomization: Rotary Atomization
• Flow: Contra-Flow
• Model NO.: YPG-25
• Heat Source: Electricity, Steam, Coal Gas, Natural Gas, Fuel
• Type: Centrifugal Spray
• Transport Package: Wooden Box
• Trademark: Snynxn
• Origin: China
• HS Code: 8419399090
• Production Capacity: 10set/Month

Product Description

Operation method

♦ This set is an apparatus that can finish drying and granulating at the same time. The needed ball granule with certain size and ratio can be got in accordance with requirements of process to adjust pressure, flow, and size of atomizing hole.
♦ The working process of this set is as follows:the liquid of raw material is pumped in through diaphram pump. The liquid of raw material is atomized into tiny droplets. Then it falls down with hot air in co-current form. Most parts of powder material is collected through the discharge port at the bottom. The exhaust and fine powdeare separated by goingthrough the cyclone, and the exhaust is discharged by draft fan. The outlet of fan can also be equipped with two grades of duster. And its recovery ratio will be 96-98%.
♦ The tower body, pipes and separator of this set contacting with raw material are made of SUS304. There is enough layer of heat preservation between inner and outer case of tower body. The filled material is fine glass cotton. The tower body is also equipped with observation door, sight glass, lamp-house and control meters and instruments that are controlled and displayed through electric control panel.
♦ The heat source of this set may be steam or electric heater, with the features of convenient operation.quick start, compact structure clean hot air etc. Moreover, installed control and regulation device of the electric heater inside eletctric control cabinet, the inlet temperature can be controlled through stepless regulation. The steam, coal fuel or oil fuel can be applied to the place where has not electricity. It can replace electric heating partially or fully. The factory can provide different heating ways in accordance with the practical conditions of customer.

 

Features

♦ The drying speed is fast. The surface area of liquid raw material after being atomized will be increased greatly.95-98% of moisture can be vaporated at the moment. The time of drying needs about ten seconds to several tens of seconds. It is suitable for drying heat sensitive material particularly.
♦ The finished product is ball granule with uniform size. Its fluidity and solubility are good. The purity of product is high and its quality is good.
♦ Its scope of application is wide. According to the characteristics of raw material, it can use hot air to dry and can also use cool air to granulate. It has strong adaptability to raw materials.
♦ Its operation is simple and stable and its control is simple and convenient and is easy to realize automatic operation.

 

Scope of Application

Granulating through atomizing dry:
Chemical industry: organic catalyst, resin, synthetic washing powder, oils, thiamin, dyestuff, intermediate of dyestuff,white carbon black, graphite, ammonium phosphate and so on.
Foodstuff: amino acids and similar substances, flavoring, protein, starch, dairy products,extractive substance from coffee, fish powder, extractive substance from meat and so on.
Pharmaceutical: Chinese patent medicines, agrochemicals,antibiotics, medical drinking agent and so on.
Ceramics: magnesium oxide, kaoline, all kind of metallic oxide, dolomite and so on.
Granulating through atomizing: all kinds of fertilizer,aluminum oxide, ceramics powder,pharmaceutical, heavy metallic super hardness steel, chemical fertilizer, washing powder,Chinese patent medicines and so on.

 

Process flow chart

1. Air filter
2. Air filter
3. Steam heater
4. Electract heater
5. Hot air rectifier board
6. Pressured atomizer
7. Rain drying tower
8. Buffer tank
9. Liquid tank
10. High-pressure pump
11. Refrigeration dehumidifier
12. Power return blower
13. Cyclone separator
14. Cloth bag deduster
15. Induced fan
16. Water film duster
17. Power return pipe
18. PLC control cabinet

 

Technical parameters

spec item		YPG-25	YPG-50	YPG-100	YPG-150	YPG-200	YPG-300	YPG-500	YPG-1000-2000
water evaporation capacity		25	50	100	150	200	300	500
diaphragm pump	power (kw)	0.35	4	7.5	11	15	22	30	The index can be affirmed in accordance with practical conditions.
	pressure(Mpa)	0.6-5,1-3. It can be regulated from 0.6 to 5, in general, it will be from 1 to 3.
heating way		electricity	+ electricity+steam		+() electricity+coal fuel oilhot air furnace
diameter of tower body (mm)		1300	1800	2400	2600	2800	3200	3800
total height (mm)		7800	9200	11600	14000	15300	17100	19000

1. The evaporated amount is related to characteristics of raw material. The evaporated amount listed in the table is related to temperature. The data can be used for reference only.
2. The atomizing pressure and Model of pump will be equipped in accordance with the amount of raw material to be treated and the size require of product.
3. The power of fan should be increased suitably after equipped with cloth bag duster.

Company profile
Division I professional production of various kinds of pharmaceutical machinery and drying equipment, our products sell well in over 20 provinces and cities, and exported to America, Mexico, Spain, Singapore, Russia, belarus, Egypt, South Korea, Malaysia, the Philippines, the united Arab emirates, Thailand, Vietnam, Pakistan, India, Iran, South Africa, Algeria, Syria, Mongolia, Bangladesh and other countries. The company is constantly updating and developing pharmaceutical machinery, chemical equipment, drying equipment, mixing equipment, granulator, coater and sewage treatment equipment and other products. With strict testing means and a complete set of scientific management procedures, and through the ISO9001 international quality system certification, product quality has reached the advanced level at home and abroad, pharmaceutical machinery products in line with "GMP standard". Our company tenet: product quality to win with excellence, sales and service to honesty, the contract to honor the letter.
Corporate core values

Pay attention to technology creation, improve quality, quality and service
Corporate mission
Let customers create more value, contribute more wealth to the society, and establish a respected brand for the country
Talent concept
People-oriented, pay attention to talent, to establish the cradle of talent to research core technology
Respect employees, identify with employees, give employees a safe harbor and a stage to show their talent
Business philosophy
Win-win cooperation