Basic Info.
Stirring Speed
0-400r/Min
Cutting Speed
0-2900r/Min
Compressed Air
0.4-0.6MPa
Air Consumption
0.3m3/Min
Applicable Industry
Food, Pharmaceutical, Cosmetic, Chemicals
Applicable Materials
Wet or Dry
Certificates
CE ISO GMP SGS
Factory Experience
25 Years
Type
Preparation Machinery
Finished Dosage Form
Granules
Certification
CE, GMP, ISO
After-sales Service
Life Term Technical Support
Transport Package
The Wooden Case
Specification
Stainless steel
Product Description
Description of wet mixing granulator: It is to use the strong stirring action of mixing pulp to make the material (powder) in the container to form an axial, radial, tangential three-dimensional motion state, so as to achieve the purpose of uniform mixing, and then through the vertical cutting knife made of true ball particles.
The application: man-machine interface control, intuitive and convenient operation, and can store 20 process parameters. Chinese patent medicine, synthetic tablets, capsule granule production. Instant beverage particle production. Chemical granule production.
Features:
atomizer metering spray to ensure that the particle composition is uniform and stable.
High productivity (only a few minutes per batch).
The cles have high true sphere and good fluidity.
The tablet has high finish, disintegration and release.
Dual frequency conversion speed regulation, available. Granulation effect.
Principles
The powder raw material and adhesive in a cylinder are mixed fully at the bottom to turn into a humid soft material. Then it is crushed at a high speed and become uniform granules.
The machine adapts a practical horizontal cylinder structure.
The driving shaft is equipped with inflatable seal. While washing, the air can be replaced by water.
Fluidized granulating processed is used and the final granules are quite round with high fluidity.
Compared with traditional technique, this type of machine can reduce 25% of adhesive and also shorten the drying time.
For each batch of material, with 2 minutes' dry mixing and 1-4 minutes' granulating, the efficiency is 4-5 times higher than that of traditional technique. Dry mixing, wet mixing and granulating are finished inside the same sealed container, which is in conformity with the requirements of "GMP".
Process flow chart
Auciliary Parts Related to the Technique of Granulation
1. Mix of powder and powder with high mixing uniformity.
2. Mixed granulation is completed once, the processing time is greatly shortened, and the efficiency is improved by 8-10 times.
3. Mix the materials in a closed stainless steel container to meet the GMP requirements.
4. Use powder and adhesive granulation, uniform particle size, high fluidity.
5. Special designed air shaft seal, compressed air passes through a precision filter to form an isolated air chamber,
6. To prevent the powder from falling into the rotating shaft of the spindle and the knife.
7. Safe operation, operating in a closed container, equipped with a safety interlock device, when the container cover is opened, the power supply is automatically cut off, and the operation is safer.
8. The control system can use PLC with man-machine interface control, can according to the requirements of raw material characteristics or special production process,
9. Input multiple sets of different production process parameters; when set, automatic control.
10. The man-machine interface can set multiple password levels to eliminate human negligence.
11. Choose sandwich heating or cooling.
12. The mixing speed can be adjusted without a variable speed.
13. If the organic solvent is used, the explosion-proof type can be used.
14. Automatic cleaning system and the whole granulation machine device can be selected.
15. The equipment is optional with a vacuum feeding device.
Technical parameters
parameter
type | GHL-5 | GHL-10 | GHL-20 | GHL-30 | GHL-50 | GHL-100 | GHL-200 | GHL-250 | GHL-300 | GHL-400 | GHL-600 | GHL-800 | GhL-1000 | G-L-1200 | GHL-1500 |
| Capacity (L) | 5 | 10 | 20 | 30 | 50 | 100 | 200 | 250 | 300 | 400 | 600 | 800 | 1000 | 1200 | 1500 |
| Production capacity (kg/) | 1 | 3 | 6 | 10 | 15 | 30 | 60 | 80 | 120 | 150 | 200 | 250 | 300 | 400 | 500 |
| Stirring power(kw) | 1.1 | 1.5 | 2.2 | 3 | 5.5 | 7.5 | 11 | 11 | 15 | 22 | 30 | 37 | 45 | 45 | 55 |
| Mixing time(min> | 0-7 |
| Stirring speed(r/min) | 0-400 | 0-300 | 0-200 | 0-150 | 0-110 |
| Cutting power(kw) | 0.55 | 0.75 | 1.1 | 1.5 | 2.2 | 3 | 5.5 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 22 | 30 |
| Cutting time(min) | 0-5 |
| Cutting speed(r/min) | 0-2900 |
| Compressed air pressure(Mpa) | 0.4-0.6 |
| Amount of compressed air(m3/min) | 0.3 | 0.6 | 0.9 | 1.1 | 1.5 | 1.8 |
Note: cutting machine 2,4 ~ 6, mixing motor parameter reserves the rights of modification, without prior notice
Corresponding table of length, width, height and diameter of high-speed mixer
type
Size
Data | GHL-5 | GHL-10 | GHL-20 | GHL-30 | GHL-50 | GHL-100 | GHL-200 | GHL-250 | GHL-300 | GHL-400 | GHL-600 | GHL-800 | GK.-1000 | Q-L-1200 | GHL-1500 |
| A | 850 | 900 | 1000 | 1100 | 1250 | 1350 | 1650 | 1650 | 1800 | 2000 | 2400 | 2400 | 2600 | 2800 | 3000 |
| B | 450 | 550 | 600 | 700 |
| C | 450 | 550 | 600 | 700 | 800 | 900 | 1000 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1600 | 1800 |
| D | | | | | | 2300 | 2400 | 2400 | 2500 | 2600 | 2800 | 3000 | 3300 | 3400 | 3500 |
| E | 1220 | 1300 | 1300 | 1350 | 1400 | 1400 | 1600 | 1600 | 1650 | 1650 | 1850 | 1900 | 2200 | 2300 | 2300 |
| F | 650 | 750 | 900 | 1000 | 1200 |
| φ1 | 219 | 300 | 400 | 500 | 600 | 700 | 750 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1550 |
| φ2 | 180 | 250 | 350 | 400 | 500 | 500 | 550 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 |
| φ3 | 102 | 102 | 133 | 133 | 159 | 159 | 200 | 200 | 200 | 200 | 250 | 250 | 300 | 300 | 350 |
| φ4 | 63 | 76 | 89 | 89 | 102 | 133 | 150 | 150 | 150 | 150 | 180 | 200 | 200 | 219 | 219 |
Note; the overall dimensions reserves the rights of modification, without prior notice
Company profileDivision I professional production of various kinds of pharmaceutical machinery and drying equipment, our products sell well in over 20 provinces and cities, and exported to America, Mexico, Spain, Singapore, Russia, belarus, Egypt, South Korea, Malaysia, the Philippines, the united Arab emirates, Thailand, Vietnam, Pakistan, India, Iran, South Africa, Algeria, Syria, Mongolia, Bangladesh and other countries. The company is constantly updating and developing pharmaceutical machinery, chemical equipment, drying equipment, mixing equipment, granulator, coater and sewage treatment equipment and other products. With strict testing means and a complete set of scientific management procedures, and through the ISO9001 international quality system certification, product quality has reached the advanced level at home and abroad, pharmaceutical machinery products in line with "GMP standard". Our company tenet: product quality to win with excellence, sales and service to honesty, the contract to honor the letter.
Corporate core values
Pay attention to technology creation, improve quality, quality and serviceCorporate missionLet customers create more value, contribute more wealth to the society, and establish a respected brand for the country
Talent conceptPeople-oriented, pay attention to talent, to establish the cradle of talent to research core technology
Respect employees, identify with employees, give employees a safe harbor and a stage to show their talent
Business philosophyWin-win cooperation
Address:
No. 57 Zhangjia, Shennan District, Shengang Street, Jiangyin City, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Chemicals, Health & Medicine, Industrial Equipment & Components, Light Industry & Daily Use, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 14001, HSE, QC 080000, GMP
Company Introduction:
Our company specially manufacturer of pharmaceutical machine and drying equipment. Anual production is over 500set. Our machines are sold to more than ten provinces all over our country, also exported to USA, Mexico, Spain, Russia, Belarus, Singapore, Korea, Malaysia, Egypt, Algeria, Thainland, Philippine, United Arab Emirates, Iran, India, Viet Nam, Turkey, Pakistan, South Africa, Syria, Mongolia and Bangladesh etc...Our company has developed quickly and we have accumulated large amount technical knowledges. Our company owns high evel of mxing and drying and granulation technology and passed lSO9001 international quality system. Our company has the strict methos of examine and the process of science managing, All products meet with"GMP"standard. Moreover, our product has acquired "high quality recommendation certificate" issued by American international quality authentication committee and "East China excellent technical product certificate " issued byJiangsu Science and Technology Association. Our company emphasizes visualization and createbrand, so we have been evaluated as both"AAA" enterprise by Jiangsu international qualification company. In addition, all of our product before shipping must do testing. To gurantee our customers qualified machines and supply after sales service.
){kind=link}