Customization: | Available |
---|---|
Warranty: | >2 Year |
Capacity: | 80kgs/Batch |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Principles
The powder raw material and adhesive in a cylinder are mixed fully at the bottom to turn into a humid soft material. Then it is crushed at a high speed and become uniform granules.
Features
The machine adapts a practical horizontal cylinder structure.
The driving shaft is equipped with inflatable seal. While washing, the air can be replaced by water.
Fluidized granulating processed is used and the final granules are quite round with high fluidity.
Compared with traditional technique, this type of machine can reduce 25% of adhesive and also shorten the drying time.
For each batch of material, with 2 minutes' dry mixing and 1-4 minutes' granulating, the efficiency is 4-5 times higher than that of traditional technique.
Dry mixing, wet mixing and granulating are finished inside the same sealed container, which is in conformity with the requirements of "GMP".
Process flow chart
Auciliary Parts Related to the Technique of Granulation
Technical parameters
parameter type |
GHL-5 | GHL-10 | GHL-20 | GHL-30 | GHL-50 | GHL-100 | GHL-200 | GHL-250 | GHL-300 | GHL-400 | GHL-600 | GHL-800 | GhL-1000 | G-L-1200 | GHL-1500 |
Capacity (L) | 5 | 10 | 20 | 30 | 50 | 100 | 200 | 250 | 300 | 400 | 600 | 800 | 1000 | 1200 | 1500 |
Production capacity (kg/) |
1 | 3 | 6 | 10 | 15 | 30 | 60 | 80 | 120 | 150 | 200 | 250 | 300 | 400 | 500 |
Stirring power(kw) |
1.1 | 1.5 | 2.2 | 3 | 5.5 | 7.5 | 11 | 11 | 15 | 22 | 30 | 37 | 45 | 45 | 55 |
Mixing time(min> |
0-7 | ||||||||||||||
Stirring speed(r/min) |
0-400 | 0-300 | 0-200 | 0-150 | 0-110 | ||||||||||
Cutting power(kw) |
0.55 | 0.75 | 1.1 | 1.5 | 2.2 | 3 | 5.5 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 22 | 30 |
Cutting time(min) |
0-5 | ||||||||||||||
Cutting speed(r/min) |
0-2900 | ||||||||||||||
Compressed air pressure(Mpa) |
0.4-0.6 | ||||||||||||||
Amount of compressed air(m3/min) |
0.3 | 0.6 | 0.9 | 1.1 | 1.5 | 1.8 |
Note: cutting machine 2,4 ~ 6, mixing motor parameter reserves the rights of modification, without prior notice
Corresponding table of length, width, height and diameter of high-speed mixer
type Size Data |
GHL-5 | GHL-10 | GHL-20 | GHL-30 | GHL-50 | GHL-100 | GHL-200 | GHL-250 | GHL-300 | GHL-400 | GHL-600 | GHL-800 | GK.-1000 | Q-L-1200 | GHL-1500 |
A | 850 | 900 | 1000 | 1100 | 1250 | 1350 | 1650 | 1650 | 1800 | 2000 | 2400 | 2400 | 2600 | 2800 | 3000 |
B | 450 | 550 | 600 | 700 | |||||||||||
C | 450 | 550 | 600 | 700 | 800 | 900 | 1000 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1600 | 1800 |
D | 2300 | 2400 | 2400 | 2500 | 2600 | 2800 | 3000 | 3300 | 3400 | 3500 | |||||
E | 1220 | 1300 | 1300 | 1350 | 1400 | 1400 | 1600 | 1600 | 1650 | 1650 | 1850 | 1900 | 2200 | 2300 | 2300 |
F | 650 | 750 | 900 | 1000 | 1200 | ||||||||||
φ1 | 219 | 300 | 400 | 500 | 600 | 700 | 750 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1550 |
φ2 | 180 | 250 | 350 | 400 | 500 | 500 | 550 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 |
φ3 | 102 | 102 | 133 | 133 | 159 | 159 | 200 | 200 | 200 | 200 | 250 | 250 | 300 | 300 | 350 |
φ4 | 63 | 76 | 89 | 89 | 102 | 133 | 150 | 150 | 150 | 150 | 180 | 200 | 200 | 219 | 219 |
Note; the overall dimensions reserves the rights of modification, without prior notice